Anaerobics There are 11 products.

Showing 1 - 11 of 11 items
  • ACTIVATOR PER ANAEROBICS Activates passive metal surfaces (zincate, cadmiate or stainless steel) and encourages the reaction between anaerobic and metal on threaded or cylindrical couplings. ACCLERANT: Enables cylindrical or threaded couplings to be assembled in a few minutes. (1-2 min. maximum) DEGREASER: Cleanses the surfaces by removing any oily films.

  • 200° HIGH PERFORMANCE THREADLOCKER To provide high mechanical resistance to lock and seal cylindrical, co-axial parts subjected to high temperatures.  It allows disassembly using normal tools.     

  • BEARINGS LOCKER To lock bearings, bushings, sliding blocks, oil retainers, pins, grooves and other cylindrical parts requiring possible disassembly. It locks and seals threaded metallic parts with medium strength resistance to disassembly

  • PENETRATING THREADLOCKER To lock, studs, nuts and bolts not requiring disassembly. To seal micro-porosity of melt treatment and to lock fine pitch threaded parts to prevent loosening due to vibrations. Its high mechanical resistance does not allow disassembly with normal tools.

  • WEAK THREADLOCKERS To lock threaded parts which have to be easily disassembled and components made of light alloys or non-ferous materials which could otherwise be damaged during disassembly. Packaging available:   10-50ml.  

  • MEDIUM THREADLOCKERS To lock nuts in general and threaded components made of various materials, including cadmiate and zincate metals.  Suitable for parts requiring disassembly.    

  • STRONG THREADLOCKERS  To lock, studs, nuts and bolts not requiring disassembly.   Low viscosity product.  It eliminates loosening due to vibrations, impacts and sudden changes in temperature.  It prevents corrosion and seizing.  Permanent locking   

  • PTFE GAS & LIQUID SEALANT To seal compliant flat and threaded metal parts in civil and industrial water, air, gas, diesel oil, LPD systems, etc. WRAS compliant for use in food systems. DVGW EN 751-1 compliant for use with air, gas, water. Packaging available:   75ml.     

  • HYDRAULIC SEALANT To seal threaded joints in hydraulic and pneumatic pipes up to a diameter of 3/4”(M20).  It allows disassembly using normal tools.   

  • PTFE OLEODYNAMIC SEALANT To seal threaded joints and fittings in general. It complies with the DIN EN 751-1, GASTEK and DVGW standards for air, gas and water tightness.  With the addition of PTFE to give the polymerised film greater elasticity and impermeability.  It allows disassembly using normal tools.   

  • DENSE FLAT SURFACE SEALANTTo seal compliant, flat and threaded metal parts in civil and industrial water, air, gas, diesel oil, LPD systems, etc. Sealant for flat surfaces, such as housings, flanges, pump bodies.  It replaces conventional gaskets.  It allows easy disassembly.

Showing 1 - 11 of 11 items